Pm câbles patch ibrid

Byenveni nan achte câbles yo patch ibrid PM ak faktori nou an. Kòm youn nan manifaktirè yo ki mennen ak founisè nan Lachin, nou menm tou nou akeyi lòd yo Customized. Konsilte pri a ak sitasyon pi ba la avèk nou kounye a.

 

● PM fib ak yon sèl FC/APC ak yon sèl FC/PC Connector

● Disponib nan chenn longèdonn soti nan 400 a 2200 nm

● Connector koutim ak opsyon longè ki disponib

 

Karakteristik

● Kle etwat (2.0 mm) ki aliyen ak ralanti aks

● Pèt tipik retounen nan 50 dB (FC/PC Connector) ak 60 dB (FC/APC Connector)

● Ceramic 8 degre Incline Ferrule sou APC Connector

● Ø3 mm pwoteksyon levit ekstèn

 

paramèt

Atik # Prefix	P5 - 405bpm-fc	P5 - 488pm-fc	P5 - 630pm-fc	P5 - 780pm-fc	P5 - 980pm-fc
Aliyman longèdonn	405 nm	488 nm	635 nm	780 nm	980 nm
Karakteristik fib
Fib Kalite	Pm - S405-XP (panda)	PM460-HP (panda)	PM630-HP (panda)	PM780-HP (panda)	PM980-XP (panda)
Opere longèdonn	400 - 680 Nm	460 - 700 Nm	620 - 850 Nm	770 - 1100 Nm	970 - 1550 Nm
Mòd dyamèt jadena	3.3 ± 0.5 µm @ 405 nm	3.3 ± 0.5 µm @ 515 nm	4.5 ± 0.5 µm @ 630 nm	5.3 ± 1.0 µm @ 850 nm	6.6 ± 0.5 µm @ 980 nm
Ouverture nimerikb	0.12	0.12	0.12	0.12	0.12
Karakteristik kab patch
Pèt ensèsyonc,d	1.50 dB (max) 1.20 dB (tip.)	1.50 dB (max) 1.20 dB (tip.)	1.2 dB (max) 1.0 dB (tip.)	1.00 dB (max) 0.70 dB (tip.)	0.70 dB (max) 0.50 dB (tip.)
Rapò disparisyonc,d	15 dB (min) 17 dB (tip.)	18 dB (min) 20 dB (tip.)	20 dB (min) 22 dB (tip.)	20 dB (min) 22 dB (tip.)	22 dB (min) 24 dB (tip.)
Pèt retounen optikc	50 dB (tipik) @ FC/PC Connector 60 dB (tipik) @ FC/APC Connector
Kalite Connector	1 FC/PC, 1 FC/APC
Lajè kle	2.00 mm (kle etwat)
Aliyman aks ralanti	Aliyen ak kle Connectore
Longè kab	1.0 m pou nimewo atik ki fini nan -1 2.0 m pou nimewo atik ki fini nan -2 5.0 m pou nimewo atik ki fini nan -5 10.0 m pou nimewo atik ki fini nan -10
Tolerans longè kab	+0.075/-0 m
Kalite levit	Ø3 mm ble pvc furcation tib
Tanperati opere	0 a 70 degre
Tanperati depo	-45 a 85 degre

 

Atik # Prefix	P5 - 1064pm-fc	P5 - 1310pm-fc	P5 - 1550pm-fc	P5 - 2000pm-fc
Aliyman longèdonn	1064 nm	1310 nm	1550 nm	2000 nm
Karakteristik fib
Fib Kalite	PM980-XP (panda)	PM1300-XP (panda)	PM1550-XP (panda)	PM2000 (panda)
Opere longèdonn	970 - 1550 Nm	1270 - 1625 Nm	1440 - 1625 Nm	1850 - 2200 Nm
Mòd dyamèt jadena	6.6 ± 0.5 μm @ 980 nm	9.3 ± 0.5 µm @ 1300 nm	10.1 ± 0.4 µm @ 1550 nm	8.0 µm @ 1950 nm
Ouverture nimerikb	0.12	0.12	0.125	0.20
Karakteristik kab patch
Pèt ensèsyonc,d	0.70 dB (max) 0.50 dB (tip.)	0.50 dB (max) 0.30 dB (tip.)	0.50 dB (max) 0.30 dB (tip.)	0.50 dB (max) 0.30 dB (tip.)
Rapò disparisyonc,d	22 dB (min) 24 dB (tip.)	23 dB (min) 25 dB (tip.)	23 dB (min) 25 dB (tip.)	23 dB (min) 25 dB (tip.)
Pèt retounen optikc	50 dB (tipik) @ FC/PC Connector 60 dB (tipik) @ FC/APC Connector
Kalite Connector	1 FC/PC, 1 FC/APC
Lajè kle	2.00 mm (kle etwat)
Aliyman aks ralanti	Aliyen ak kle Connectore
Longè kab	1.0 m pou nimewo atik ki fini nan -1 2.0 m pou nimewo atik ki fini nan -2 5.0 m pou nimewo atik ki fini nan -5
Tolerans longè kab	+0.075/-0 m
Kalite levit	Ø3 mm ble pvc furcation tib
Tanperati opere	0 a 70 degre
Tanperati depo	-45 a 85 degre

► Mode dyamèt jaden (MFD) se espesifye kòm yon valè nominal. Li se dyamèt la nan 1/e la²Nivo pouvwa nan jaden an tou pre.

► Ouverture nimerik (NA) espesifye kòm yon valè nominal.

► mezire nan longèdonn aliyman an.

► Mezi nan rapò a disparisyon minimòm ak pèt ensèsyon maksimòm pou câbles patch endividyèl yo disponib nan kontakte sipò teknoloji.

► Pou aliyman kle koutim, tanpri kontakte sipò teknoloji.